* * * This website is currently in expired state. * * *

Expired

Temperature Humidity Testing Chamber

Temperature Humidity Testing Chamber

Product details

  • Workspace Dimension: 1200W X 1200D X 1200H mm
  • Temperature Range: -70 degree C + 180 degree C
  • Minimum Time Duration :- 8 hours
  • Testing charges :- 700 INR per hour

Overview:

These are widely used for testing various types of materials, components and equipments for their tolerance of heat, cold, dry and humidity. It is applicable for quality inspection of all types of electronic products, electrical appliances and products from communication, automobiles, plastics, metal, food, chemical, building materials, medical components and equipments and aerospace spares and components.

Further the chamber can be used for environmental tress screening(ESS) of the temperature portion of 5°C/Min ramp rate as these chambers are capable of having ramp rate of 5°C/Min and above between +80°C to -40°C.

Complies with:

 

  • IEC 60068-2-30 damp heat cyclic.
  • IEC 60068-2-38 composite temperature humidity cyclic tests.
  • IEC 60068-2-78 damp heat study state.
  • MIL STD 202 & 810.
  • IS 9002-1997 Part 6.
  • JSS 55555 test No.10, 5.10

Salient features:

  • Workspace dimensions: 1200 x 1200 x 1200 mm.
  • Temperature range: -70°C to +180°C.
  • Temperature tolerance: ±1°C.
  • Ramp rate: 5°C/Min or more between +130 to -40°C & visa versa.
  • Humidity range: 10% to 95% RH.
  • Humidity tolerance: ±3% RH.
  • Temperature: By mechanical cascade refrigeration system working on 2Nos imported Danfoss Maneurop compressors with air cooled condenser. System has refrigerant receiver, filter driers, sight glasses, expansion valves, high efficient copper tubes and fins configuration, suction liquid heat exchanger, suction line accumulator etc. Additional de-humidification evaporator coil with solenoid valve for close control of humidity. System works on CFC free environmentally friendly R404a and R23 refrigerants.
  • Instrumentation: 7” HMI touch panel of Schneider make working on Eurotherm Mini8 processor programmer controller working on imported Rotronic make capacitive sensor. Different menus like Process, Program, Parameter setting, Mimic, Trend & data logging can be recalled and loaded.
  • Ethernet communication facility. USB port for pen drive to record data logging.
  • Port holes with rubber stopper.
  • Viewing window with interior halogen lamp.

 

Expired

COMET ENVIRONS PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.