COMET ENVIRONS PVT. LTD.

Sand And Dust Chamber

Product details

  • Workspace Dimension: 1000W X 1000D X 900H mm
  • Temperature Range: Ambient to 55 degree C
  • Minimum Time Duration :- 8 hours
  • Price :- 500 per hour INR

Overview

These chambers are used for checking ingress of sand and dust in luminous, plastics and automotive IP5X and IP6X tests.

Needs specifications of:

  • IEC 60529, DIN40050, IP5K0, IS9000 – 1981 Part 12,
  • JSS 55555 – test No.14.
  • SAE J575 sub paragraph GJ-ISD0207
  • ASTM C150-77
  • Salient features:
  • Workspace dimensions: 1000(W)x1000(D-front to back) x 900(H) mm
  • Temperature range: Ambient to 55°C.
  • Humidity: Less than 50% RH(workspace should be dry).

Instrumentation:

  1. By microprocessor based temperature controller.

  2. Agitation timer.

  3. Settling timer.

  4. Cycle counter.

Dust used for this test shall be dry.

  • Approved dust types: Equivalent to Arizona dust, portland cement dust and 213 silica sand.
  • Dust measuring device: This device shall be kept at any place within the chabmer. The
  • dust laden air will be circulated and dust is allowed to settle down. The amount of
  • dust collected for different agitation time and settling time is measured and recorded.
  • Viewing window: Full size viewing window & wiper along with halogen lamp.
  • Port hole with rubber stopper.
  • SS wire mesh shelf above agitator.

Safety:

  •  MPCBs for motor.
  • High temperature cut out in case of temperature overshoot.

 

COMET ENVIRONS PVT. LTD.

COMET ENVIRONS PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.