Overview:
These are widely used for testing various types of materials, components and equipments for their tolerance of heat, cold, dry and humidity. It is applicable for quality inspection of all types of electronic products, electrical appliances and products from communication, automobiles, plastics, metal, food, chemical, building materials, medical components and equipments and aerospace spares and components.
Further the chamber can be used for environmental tress screening(ESS) of the temperature portion of 5°C/Min ramp rate as these chambers are capable of having ramp rate of 5°C/Min and above between +80°C to -40°C.
Complies with:
- IEC 60068-2-30 damp heat cyclic.
- IEC 60068-2-38 composite temperature humidity cyclic tests.
- IEC 60068-2-78 damp heat study state.
- MIL STD 202 & 810.
- IS 9002-1997 Part 6.
- JSS 55555 test No.10, 5.10
Salient features:
- Workspace dimensions: 600x600x600 mm.
- Temperature range: 15°C to +95°C.
- Humidity range: 15% to 95% RH.
- Humidity tolerance: ±3% RH.
- Temperature: By mechanical refrigeration system working on imported Danfoss Maneurop compressor with air cooled condenser. System has refrigerant receiver, filter drier, sight glass, expansion valve, high efficient copper tubes and fins configuration, suction liquid heat exchanger, suction line accumulator etc. Additional de-humidification evaporator coil with solenoid valve for close control of humidity. System works on R22 refrigerant.
- Instrumentation: Imported two channel Eurotherm temperature programmer controller working on imported Rotronic make capacitive sensor.
- RS232 communication facility for monitoring and recording
- Port holes with rubber stopper.
- Viewing window with interior halogen lamp.
